Change the settings of the D-Link router by accessing the dlinkrouter.local page. If you using a D-Link router, you may occasionally need to change its settings to increase your internet speed or avoid interference. You can do this through the router’s online configuration mode. This blog will guide you how to configure the D-Link router through dlinkrouter.local page.
If you need to make changes to any of the following things:
Then, you have to log in to admin panel of your router to do so. To log into D-Link router then you will need to access the network by using LAN cable. You have to know the router’s default IP address or local web address dlinkrouter.local and router’s user name & password. You can check these essential details in your device manual.
Note: If the web address failed to work then you can search the IP address for your D-Link router on the printed manual that came with your router.
Once you are logged in to the dlinkrouter.local web interface, you can change the settings and update the firmware for your router. Make sure you don’t disconnect the network when you configure your router. If you failed to log in to the web interface of your D-Link or you forgot the password for your router then you need to reset your router to its default factory settings.