Dlink dap-1330 setup
If you are looking for a better option to boost your internet speed and provide larger coverage in one device, D-Link DAP 1330 is the one for you. It comes with various features and functionalities to provide you with high performance. If you are having any issue with your device, you can resolve it with the dlink dap 1330 troubleshooting methods provided here. You will get to know the login and setup process of your device and how to do the firmware update and reset.
Instruction for D-link DAP 1330 Login
- First of all, you need to connect your device to the modem and computer using the Ethernet cable.
- Then, you have to open your web browser on your computer.
- Enter the default IP address, 192.168.0.50 in the address bar of your browser and access the router’s web-based user interface.
- You will see the login page where you have to enter the default username and a password.
- The username that you have to use for your D-Link DAP-1330 is n/a.
- The default dlink dap 1330 admin password is (blank).
- Once you enter the username & password you have to hit Enter key.
- Now, you will be able to see the control panel of your router.
- With that, you are all done with the login process of your device.
Easy steps to do the D-link DAP 1330 setup
If you are having a hard time while doing the setup, you do not have to worry about that anymore, here are some of the simple steps to do the setup within a few minutes.
- For the setup process, connect to the DAP-1330 wirelessly with the Wi-Fi name (SSID) and password that you can see on your Wi-Fi Configuration Card.
- Then, launch a web browser of your choice and enter http://dlinkap.local./ in your browser’s URL field.
- On the login page, enter the default username as admin and the password is blank.
- You will see the configuration interface where you can configure or your extender.
- Next, the setup wizard automatically detects your internet connection type if you are logging into your device for the first time.
- These wizard walks you through the complete setup process.
- Follow the instructions to complete the setup and save the settings.
- Now, you can enjoy your high-speed internet without any interruption.
D-Link DAP 1330 troubleshooting steps
If you are using your D-Link device for the first time. You might face some of the common issues that occur while doing the setup and login, but you do not have to worry about that. These issues can be resolved easily with some simple dlink dap 1330 troubleshootingsteps. Some of the most common issues include that you are notable to access your device’s internet, your D-Link DAP 1330 not working, or not able to load the login page. If you see that your d-link dap-1330 flashing orange, it indicates that your device is in recovery mode due to the firmware issue. For that, you need to update your firmware. You can see the instructions below to resolve all the issues.
If your D-Link DAP 1330 not working, do not panic in this situation. You will be able to resolve these issues with the simple steps given below.
- First, you need to check if you have connected your devices properly using the wired method. Try to disconnect your devices and then reconnect them.
- Next, check if you are entering the correct web address, otherwise use the IP address.
- Try checking the login credentials if they are correct.
- If that’s not working, you can restart your device after letting it cool for a few seconds.
- The last option you have is to reset your device to factory default.
You can easily update the firmware of your D-link dap-1330 without any issue. You need to update your device for better performance and security. Check out the steps below.
- You need to access the manage page of your D-Link device by logging in to it.
- Then, click on the Management drop-down menu, and select Upgrade.
- Now, click Save at any time and save the changes you have made on this page.
- Make sure you have already downloaded the latest version of firmware on your computer.
- Select the File to locate the firmware file on your computer and perform a manual firmware upgrade.
- With that, you have completed the firmware update process.
If you have issues that you cannot resolve with the troubleshooting steps you can do the factory device. See the instructions below.
- First, you have to turn on your D-Link device.
- Then, press the Factory Reset button using the paper pin and hold for at least 15 seconds, and then release it.
- Your device will restart automatically.
- It will be restored to the factory default version and you have to set it up again.
Conclusion
This information will be a great help with your D-Link DAP 1330 device setup using the dlink dap 1330 admin password. For further more details, you have to call us on our toll-free number and get assistance from our experts.