A Complete Guide on D’link DAP 1720 Setup and Configuration

Get better Wi-Fi throughout your entire home by doing the d’link dap 1720 setup. This little plug n play device lets you improve your network range and signal strength. It rebroadcasts your router’s signal, hence creates a second wifi network. The dlink wifi extender setup dap 1720 is an affordable way to extend your home network and cover dead zones. The process of the http://dlinkap.local setup becomes quick and simple with the built-in setup wizard. 

This article explains to you how to get your D-link range extender up and running. From accessing the Dlinkap.local login page to updating the d-link dap-1720 firmware, it’s all here. Moreover, here you will find tips on how to reset d’link wifi extender password along with the d’link dap 1720 reset steps.

Best features of D’link DAP 1720

• This extender by D-link uses both WiFi bands for HD streaming and online gaming.
• It delivers combined dual band Wi-Fi speeds up to 1750 Mbps.
• Features external antennas for providing great coverage and improving WiFi performance.
• A smart signal indicator on the Dlink extender helps you to find the right location for optimal coverage.
• Built in gigabit Ethernet ports let you connect your wired devices to the network. 
• The quick setup wizard makes the d’link dap 1720 setup and configuration easy.
• Dlink DAP extender can work with any modem and router. 
• A WPS button lets you connect to the network at a push of a button.

How to install the D-Link DAP extender via a WPS push button? 

• In the box, you will get power cord, Ethernet cables, antennas, and the d-link dap-1720 manual.
• After you unbox the Dlink extender, attach the antennas, plop it down next to your router and near a power source.
• Now, plug in the DAP 1720 to a power socket using the power cord and turn it on.
• Next, locate and press the WPS button on the router to get started with the dlink wifi extender setup dap 1720.
• Within a minute, press and hold the WPS button for about 5 seconds on the DAP AC1750.
• A solid green LED light on the Dlink extender indicates a good connection between the extender and the router.
• Finally, unplug the D-link wifi extender and place it at your desired location to enjoy seamless wifi connectivity.
• If you face any issues during the initial installation, get tips on how to reset d’link dap 1720 from our technical team. 

Steps for the http://dlinkap.local Setup

After initial setup, you will need to update and configure the settings of your DAP AC1750. For this, you need to log in to the Dlink extender’s web interface. Follow the steps below to access the Dlinkap.local Login page and perform the d’link dap 1720 setup process.

• First of all, establish connections between the computer, router, and the D-link AC1750 extender.
• Use the included Ethernet cable and connect it from the router to your Dlink extender.
• Then take another Ethernet wire and connect it from the computer to your DAP1720 extender’s LAN port.
• Afterward, launch your default browser from the connected PC.
• Next, type http://dlinkap.local or 192.168.0.50 in the browser’s address bar and press Enter.
• On the next page, enter the default admin details of your D’link Ac1750 extender.
• The default admin username and password are mentioned in the d-link dap-1720 manual.
• Once logged in, click on the quick setup to initiate the Dlink setup wizard.
• Next, choose your network name that you want to extend and enter the wireless password.
• Now, navigate to the Wireless settings to change the SSID name and password of your D’link 1750 wifi extender.
• Next, you would be prompted to update the d-link dap-1720 firmware. 
• After you configure all the settings, click on Save and then click on Finish.

If you have trouble accessing the Dlinkap.local Login page, you can contact the expert team on the helpline number. 

D-link dap-1720 firmware update instructions

• The first step is to download the latest firmware version for the DAP 1720 from D-link Support site.
• You can save the downloaded file on the desktop that is connected to your network.
• Now, launch a browser and visit the Dlinkap.local Login page.
• Afterward, log in with the default admin credentials to access the http://dlinkap.local Setup dashboard.
• Next, navigate to the Management section from the D’link settings menu.
• Then click on Upgrade to open the Dlink firmware update screen.
• Select the Browse to locate the saved firmware file on your PC.
• Now, click on Upload and then click on Firmware Update to start the process.
• After the D-Link DAP-1750 firmware update, your extender will reboot.
• If you get an error while updating the d-link dap-1720 firmware, get help from the technical experts.

FAQs about d’link dap 1720 setup & login

How to reset d’link wifi extender password and change it?

• Firstly, visit the dlinkap.local login page on your connected PC.
• Next, click on the Management tab from the dlink extender’s configuration page.
• Now, click on the System Tools.
• Then click on Factory Reset to reset your Dlink device.
• Now, go to the Admin section and click on Change Password.
• In the New Password field, enter a strong password for your D-link extender.
• Retype the password in the Confirm Password field.
• Once done, save the dlink extender password by clicking on the Apply button. 

How to reset d’link dap 1720 to the factory defaults?

If you forget the password of your Dlink DAP 1750, you can do the d’link dap 1720 reset. One thing you need to remember is that doing a factory reset on the Dlink device will erase all your personalized settings.

• Locate the reset button in a pinhole on the D-link Ac1750 extender.
• Now, press and hold the button using the paperclip or any other sharp object to reset your dlink device. 
• Afterward, release the button and reboot the Ac1750 extender.
• Next, you have to do the http://dlinkap.local Setup again.

My D-Link wifi extender is blinking red. How can I Troubleshoot it?

• The first troubleshooting tip is to restart your Dlink extender as well as your router.
• Verify that your dlink Ac1750 is plugged into a power socket and get a proper power supply.
• Try to place the D-Link wifi extender closer to your existing router.
•  Make Sure the d-link dap-1720 firmware is up-to-date.
• If nothing works, perform the d’link dap 1720 reset and try to reconfigure it.

Conclusion

This was all about the dlink wifi extender setup dap 1720 and login. Hope this article helped you set up and configure your DAP 1720 extender. If you have any queries or face issues, you can get help from our technical experts. You can contact our technical executives through our toll-free number or via a live chat window. Our team of experts will provide you simple and quick resolutions to the dlink extender issues.